IP65 Motorised Ball Valves FCU Fan Coil Valve For air conditioning

IP65 Motorised Ball Valves FCU Fan Coil Valve For air conditioning

Quick Detail:

24/110/220Vac 

DN15/20/25/32

2way/3way

NPT/BSPP

Cool/heat water or 60% glycol

Description:

● Well waterproof and dustproof features (IP65)
● High Differential pressure up to 1MPa and strict closure
● High flux and no sediment due to direct flow through of valve
● Soft shut-off and open to eliminate water hammer in most applications
● Motor does not bear any forces when valve is not in motion, extending service life
● Actuator can not be affected by temperature of valve and environment
● Quick and easy replacement by movable actuator
● The actuator can be installed after the application and pipe was fixed that is efficient for installation,
● Valve can be mounted near to wall because of actuator’s off-center configuration
● Valve can be operated by general tools when actuator has been removed
● The actuator is available for all of 1/2″－1 1/4″ ball valves
● Actuator installation allows for 2 different wiring orientations, thus providing ease of wiring and service

Applications:

BV03 series ball valves are widely used in central air-conditioning cool/heat water system.It can accurately

 control the flow of cool/heat medium depending upon the requirements of the given application,and can not

 result in suddenchange

 of temperature and to control the room temperature accurately.

Specifications

Medium:Cool/heat water or 60% glycol

Size:DN15,DN20,DN25,DN32

Structure: Two way or Three way

Operating Mode:on/off or 3-point control (24Vac)

Power Supply:110Vac,220Vav,24Vac etc.

Power Consumption:5W (during valve position change)

Running Times:15 sec.

Pipe Fitting:NPT internal thread

                     Optional: BSPP external thread

                     BSPP internal thread

                     BSPT internal thread

                     Compression external thread

Materials

Body:forged brass, nickel plated

            Ball:chrome plated brass

            Stem:brass

Seats:fiberglass reinforced teflon PTFE

Seal:2 EPDM O-rings, lubricated

Pressure Rating:2MPa

Media Temp. Range:1℃ to 95℃

Max. Differential Pressure:1MPa

Protection Grade:IP65

Types:2-way Valve,3-way Valve (side)；3-way Valve (base)